Skip to content
Rendair

Read a scaled drawing in real sizes

Pick the scale, type a length from the sheet, get the real size. Or go the other way to set out a drawing by hand.

Scale
Convert
In
Show the result in
Real length
2.5 m
At
1:100

Reading a scaled drawing

Drawings carry the building at a fraction of its size. A length on a 1:100 sheet is a hundred times shorter than the wall it stands for, and most mistakes on site start with that factor applied the wrong way, or not at all.

This converter covers the scales architects use most, from 1:1 details to 1:2500 site plans, in millimetres, centimetres, meters, inches and feet. Type what the scale rule reads and get the real size, or type a real size and get the length to draw.

Check the scale printed on the sheet before trusting any figure: a drawing printed to fit a page is no longer at its stated scale. When in doubt, measure a dimension that is written on the drawing and compare.

Units and scale go together. If the sheet is in inches and the site in meters, convert the units first with the unit converter, then apply the scale.

Other free tools

The numbers are done. Now the image.

Turn the sketch, plan or model into a render the client can react to.